Online Financial Tips

Article by hi joiney

5.2 functional requirements of major equipment5.2.1 user information transmission unit should have the following functions:1 network users to receive Fire Alarm Information, and information through the transmission network to send alarm to the monitoring center.

2 reception building fire operation status information, and information sent through the transmission network alarm monitoring center.

3 priority delivery of information and manual fire alarm alarm information.4 with the device self-test and fault alarm.5 with the main, standby power automatic conversion, backup power supply capacity should be able to ensure that the user information transmission device continuously during normal working hours is not less than 8h.

5.2.2 alarm receiving system should have the following functions:1 for receiving, processing the user information transmission unit to send the fire alarm information.2 alarm alarm time ÷ network user name, address, telephone number, the internal alarm point location, geographical information.

3 of fire alarm information to verify and confirm, confirmation should be alarming network user’s name, address, telephone number, the internal alarm point location, control centers and other information connected to the city police command center of the fire communications center, or other response alarm transmission of fire information terminal, and displays information on fire response information terminals.

4 receiving, storing the user information transmission device to send status information to run fire protection facilities, fire facilities, the construction of fault information to track, record, query and statistics, and sent to the appropriate network user.

5 automatic or manual transmission of information on the user device inspection test and inspection test results show.

6 shows, check the history of alarm information and related information.7 users and networking of voice, data or video communication. Real-time record8 and the corresponding alarm receiving voice, asked, and the original record information can not be modified.

9 with the system self-test and fault alarm.10 with System Start, stop time, recording and search function.11 with the basic functions of the Fire Geographical Information System.5.2.3 information inquiry system should have the following functions:1 query Internet users fire alarm information.2 as listed under Appendix A query network users running building fire protection information.3 by the elements listed in Appendix B Internet users check the fire safety management information.

4 Internet users check daily duty, and other information in the post.5 paragraph 1 of this Article 4 of the information, can be by date, unit name, unit type, building type, building fire type, the type of information retrieval such as retrieve items and statistics.

5.2.4 user service system should have the following functions:1 for the network users query its own fire alarm, building fire protection and fire safety operational status information management information service platform.

2 building on the interconnection of users daily maintenance of fire control facilities to manage the situation.

3 provide fire safety for the network management information data entry, editing services.4 through random Chagang, networked users responsible for fire safety officers on duty on duty on the remote supervision of day to day.

5 users permissions for the network.6 users for the networked fire laws and regulations, fire knowledge and fire conditions and other information.

5.2.5 fire information terminals should have the following functions:1 monitoring center receives a fire alarm sent the network user information, the confirmation signal to their feedback, and issued clear sound, light prompt signal.

2 alarm network user’s name, address, telephone number, the internal alarm point location, then police control center, fire alarm terminal to receive information and time information.

3 white with equipment inspection and fault alarm.5.3 system power requirements 5.3.1 the power monitoring center where the building should be the highest level of configuration, and should not be less than two loads, and should ensure that non-continuous, intermittent electricity.

5.3.2 user information transmission device’s main power supply should be clearly marked and should be connected directly with the fire power, should not use the power plug; user information transmission between the device and its standby power supply should be directly connected.

6 System Construction 6.1 General provisions 6.1.1 Remote Monitoring System for the construction unit should fire, computer network, communication, computer room installation of the appropriate technical staff.

6.1.2 remote monitoring system construction shall be in accordance with the project design documents and construction technical standards.

6.1.3 remote monitoring system construction, should have the system map, equipment layout plan, network topology, network wiring connection diagram, Lightning Anti-static grounding and ground wiring connection diagram and automatic fire alarm systems, building fire protection technical parameters of the external output interface, communication protocol, system debugging programs necessary technical documentation.

6.1.4 before the construction of remote monitoring system, response equipment, materials and accessories for admission examination, pass the inspection are not allowed. Equipment, materials and accessories to the construction site should have a list of instructions, product certificates, national statutory inspection agencies inspection report and other documents, and specifications, model should meet the design requirements.

6.1.5 remote monitoring system construction process, construction unit should make design changes, installation and commissioning and other related records.

6.1.6 remote monitoring system, construction quality control should meet the following requirements:1 each process should be carried out technical standards for construction quality control, and each procedure is completed and pass inspection before they are allowed under the procedures. Pass the inspection, rectification should be carried out.

2 hidden works should be concealed before the inspection, and the formation of acceptance documents.

Leave a Reply